Development of an add-on circuits for multimeters

Τίτλος

Development of an add-on circuits for multimeters

Θέμα

Voltohmmeters

Circuits & electrical engineering

Δημιουργός

Koullapis, Sotiris

Πηγή

Higher Technical Institute

Το πλήρες κείμενο είναι διαθέσιμο από το Υπουργείο Ενέργειας, Εμπορίου Βιομηχανίας και Τουρισμού.

Εκδότης

Library of Cyprus University of Technology

Ημερομηνία

1995

Συνεισφέρων

D. Lambrianides

Δικαιώματα

Απαγορεύεται η δημοσίευση ή αναπαραγωγή, ηλεκτρονική ή άλλη χωρίς τη γραπτή συγκατάθεση του δημιουργού και κάτοχου των πνευματικών δικαιωμάτων.

Μορφή

pdf

Γλώσσα

en

Τύπος

text

Αναγνωριστικό

EED0522

Σύνοψη

In Chapter 1 the author tries to studies the various types of Add-on circuits for multimeters. So, different methods of measuring the following facilities: voltage, current, resistance, capacitance, inductance, frequency are represented in
Chapter 1. Their mode of operation is explained briefly.
After the decision about the methods to be used for constructing each circuit, the author proceeds in Chapter 2, in the selection and design of the circuits.
Chapter 3, deals with the development an~ construction of the printed circuit boards. The method and also the circuits In their general form is represented.
Chapter 4 describes the different methods for calibration very briefly. The calibration of each one of the circuits is also represented. Different types of errors are mentioned.
Chapter 5 presents the results and the testing methods. All results are represented and also the conditions under they were obtained.Finally the comments on the Add-on circuits are discuses.