Evaluation of gear manufacture by generation methods

Τίτλος

Evaluation of gear manufacture by generation methods

Θέμα

Gearing

Gearing--Design and construction

Δημιουργός

Mouttas, Charalambos

Πηγή

Higher Technical Institute

Το πλήρες κείμενο είναι διαθέσιμο από το Υπουργείο Ενέργειας, Εμπορίου Βιομηχανίας και Τουρισμού.

Εκδότης

Library of Cyprus University of Technology

Ημερομηνία

1996

Συνεισφέρων

Roushias, D.

Δικαιώματα

Απαγορεύεται η δημοσίευση ή αναπαραγωγή, ηλεκτρονική ή άλλη χωρίς τη γραπτή συγκατάθεση του δημιουργού και κάτοχου των πνευματικών δικαιωμάτων.

Μορφή

pdf

Γλώσσα

en

Τύπος

text

Αναγνωριστικό

MED0453

Σύνοψη

This project has been divided into five chapters.
Chapter one deals with an introduction on gears. It describes the four basic types of gears i.e. spur, helical, bevel and worm gears. It also deals with the three groups that gears are classified and also the involute shape of tooth. Then the various design parameters that are used in the gears are explained.
Chapter two, is referring about the two important generating methods i.e. shaping and hobbing process. Each method is described seperately and in each method is described the principles of operations, advantages and disadvantages, and the various types of machines.
Chapter three, deals with the various manufacturing method of gears i.e. milling, broaching, planning,hobbing and shaping, various finishing processes i.e. burnishing, shaving, grinding, lapping and honning, and the various heat treatments. It also reffering the various materials which are used for manufacturing of gears.
Chapter four, is about the manufacturing of gears on the two machines (shaping and hobbing) and the accuracy test on the two manufactured gears. Those tests were carried out at H.T.I Metrology Laboratory.
At last, chapter five is reffering for two experiments.
One for manufacturing a spur gear on the shaping machine OH020 and the other for the manufacturing a helical gear on the hobbing machine 5K324A.