Part programming on a C.N.C. vertical milling machine and design of a milling fixture

Τίτλος

Part programming on a C.N.C. vertical milling machine and design of a milling fixture

Θέμα

Milling cutters

Machine-tools--Numerical control--Programming

Computer software--Development

Milling (Metal-work)

Δημιουργός

Kyriakou, Nikos

Πηγή

Higher Technical Institute

Το πλήρες κείμενο είναι διαθέσιμο από το Υπουργείο Ενέργειας, Εμπορίου Βιομηχανίας και Τουρισμού.

Εκδότης

Library of Cyprus University of Technology

Ημερομηνία

2005

Συνεισφέρων

Messaritis, V.

Δικαιώματα

Απαγορεύεται η δημοσίευση ή αναπαραγωγή, ηλεκτρονική ή άλλη χωρίς τη γραπτή συγκατάθεση του δημιουργού και κάτοχου των πνευματικών δικαιωμάτων.

Μορφή

pdf

Γλώσσα

en

Τύπος

text

Αναγνωριστικό

MED0527

Σύνοψη

This project deals with the manufacturing of a component on the C.N.C vertical milling machine as well as the design and manufacturing of a milling fixture to ensure location, support and clamping of the component to be manufactured.
First the theory of the project was prepared with the basic principles of Numerical Control following a general study ofthe C.N.C Bridgeport IMKII milling machine and the TNC 155 Heidenhaim control. Also few words mentioned about programming, machining forces, trigonometric formulas and relative knowledge about milling.
The main part of this project is the part programming for the manufacture of two components from which the first one will be used as a fixture for the manufacturing of the second one.
Both parts have to be performed using linear interpolation, circular interpolation, canned cycles and subroutines.