CO2 welding controller

Τίτλος

CO2 welding controller

Θέμα

Stepping motors

Δημιουργός

Joseph, Pantelis

Πηγή

Higher Technical Institute

Higher Technical Institute

Εκδότης

Library of Cyprus University of Technology

Ημερομηνία

1990

Συνεισφέρων

Spyrou, S.

Δικαιώματα

Απαγορεύεται η δημοσίευση ή αναπαραγωγή, ηλεκτρονική ή άλλη χωρίς τη γραπτή συγκατάθεση του δημιουργού και κάτοχου των πνευματικών δικαιωμάτων.

Μορφή

pdf

Γλώσσα

eng

Τύπος

text

Αναγνωριστικό

EED0075

Σύνοψη

The purpose o~ the project is to design, construct
and test an arm suitable ~or C02 WELDING TORCH.
The arm and the work sur~ace are driven by stepper
motors. Each stepper motor is driven by a stepper
motot- driver. The MTB 85-1 is used as a controller element within the system. By using a suitable so~tware and a suitable converter circuit ~or the RS232C serial port o~ the PC the 8085 communicates with a PERSONAL COMPUTER and according to the commands o~ the operator the 8085 executes.
The operator can type the width and the length o~
the metal to be welded and according to the width the
corresponding speed is selected automatically when the
motors rotate and the arm is positioned accordingly
above work sur~ace. The operator can also display the width and length and also by typing H a help menu appears on the screen. The operator also by typing C the same operation is repeated continuously with same data.