Design of a passenger lift of a multi-storey building

Τίτλος

Design of a passenger lift of a multi-storey building

Θέμα

Elevators

Elevators--Design and construction

Buildings

Δημιουργός

Theodorou, Arestis

Πηγή

Higher Technical Institute

Το πλήρες κείμενο είναι διαθέσιμο από το Υπουργείο Ενέργειας, Εμπορίου Βιομηχανίας και Τουρισμού

Εκδότης

Library of Cyprus University of Technology

Ημερομηνία

1990

Συσχέτιση

Απαγορεύεται η δημοσίευση ή αναπαραγωγή, ηλεκτρονική ή άλλη χωρίς τη γραπτή συγκατάθεση του δημιουργού και κάτοχου των πνευματικών δικαιωμάτων.

Μορφή

pdf

Γλώσσα

eng

Τύπος

text

Αναγνωριστικό

MED0017

Σύνοψη

The objective of this project is to design a passenger lift, which lift should be of a capacity of 6 persons, speed of 1m/sec and is to be used for a multi-storey building. Also, to present design calculations, to make separate detail drawings to a large scale for small components and to present manufactures catalogues and selection procedures for the machine components to be used to meet the terms and conditions specified above. The whole project has been divided into 9 chapters. Chapter 1, deals with the car control system, the different types of drive and some general notes for the doors. Chapter 2, deals with the traffic analysis and some calculations are made in order to find the round trip time of the lift. Chapter 3, deals with the design of the hoist with some relevant calculations in estimating the diameter and the tensile strength of the wire rope.
In Chapter 4, a description and the importance of the
counterweight is made. Also the design of the counterweight too. Chapter 5, deals with the selection of guides and the evaluation of forces and stresses on guide rails during normal and safety gear operation. Then the design of the fishplate and the guide's brackets are taken place. Chapter 6, deals with the power transmit ion, with the relevant calculations in designing the sheave, diverting pulley, the staff securing it and keys and keyways. Chapter 7, deals with the safety features that someone must have in mind in a case of being trapped in the car. Also, the selection and design of spring buffer was taken place. Suitable instructions and maintenance procedures are included in chapter 8. Finally, the cost analysis of this lift is taken place.