Design of the services of a factory

Τίτλος

Design of the services of a factory

Θέμα

Industries

Electrical engineering

Engineering sciences

Telecommunication systems--Design and construction

Fire alarms--Installation

Δημιουργός

Leandrou, John

Πηγή

Higher Technical Institute

Το πλήρες κείμενο είναι διαθέσιμο από το Υπουργείο Ενέργειας, Εμπορίου Βιομηχανίας και Τουρισμού

Εκδότης

Library of Cyprus University of Technology

Ημερομηνία

1991

Συνεισφέρων

Anastasiou, S.

Δικαιώματα

Απαγορεύεται η δημοσίευση ή αναπαραγωγή, ηλεκτρονική ή άλλη χωρίς τη γραπτή συγκατάθεση του δημιουργού και κάτοχου των πνευματικών δικαιωμάτων.

Μορφή

pdf

Γλώσσα

en

Τύπος

text

Αναγνωριστικό

EED0167

Σύνοψη

GENERAL INFORMATION ABOUT THE DESIGN OG THE ELECTRICAL INSTALLATION OF THE FACTORY
1. ELECTRICITY SUPPLY:
The local supply authority is the Electricity Authority of Cyprus. All the equipment and systems shall be suitable for operation at 240/415 V, single phase or three phase, as the case may be, at a frequency of 50Hz
2. REGULATIONS:
All electrical work and design shall be executed in accordance with the latest edition (15th), of the Institution of Electrical Engineers regulations, issued in London U.K. All works in general shall comply with any other local statutory
3. MATERIALS
All materials, equipment, fittings, accessories, and apparatus utilized, whether specified or shown the drawings or not, would be new, and manufactured in accordance with the specifications of the relevant applicable British Standards. Materials etc manufactured in accordance with other internationally recognized standards are not excluded, provided that adequate and satisfactory evidence, indicating that such materials comply with the minimum requirements of the corresponding British Standards. Workmanship shall conform with the appropriate and relevant British Standards Codes of Practice, at the date of submission of the project
4. DRAWINGS
The project drawings are intended to show the approximate position of equipment, panels, distribution boards and approximate runs of ductwork conduit, cables etc, to enable the contractor to measure from these drawings, after making due allowance for these approximations.