Preparation of bill of quantities using the traditional method
- Τίτλος
-
Preparation of bill of quantities using the traditional method
- Θέμα
- Building--Estimates
- Bill
- Quantity surveyors
- Δημιουργός
-
Constantinou, Elpiniki
- Πηγή
- Higher Technical Institute
- Το πλήρες κείμενο είναι διαθέσιμο από το Υπουργείο Ενέργειας, Εμπορίου Βιομηχανίας και Τουρισμού.
- Εκδότης
- Library of Cyprus University of Technology
- Ημερομηνία
- 1996
- Δικαιώματα
- Απαγορεύεται η δημοσίευση ή αναπαραγωγή, ηλεκτρονική ή άλλη χωρίς τη γραπτή συγκατάθεση του δημιουργού και κάτοχου των πνευματικών δικαιωμάτων.
- Μορφή
- Γλώσσα
- eng
- Τύπος
- text
- Αναγνωριστικό
-
CED0293
- Σύνοψη
-
Bill of quantities is the means whereby the majority of building work is described and
measured, it sets out the various items of work in recognised manner and in a logical
sequence.
In addition to this bill of quantities assists building contractors to estimate the cost of a
building project before any work commences.
There are three methods of preparing the bill of quantities:
1. Traditional Method
2. Cut and Shuffle Method
3. By Computer
In this project the Traditional Method is used and the objective are as follow:
- To write a report on the different method of "taking off" used in Cyprus.
- To compare them with Smm7
- To carry out the "taking off' measurements of the drawings provides using the
traditional method.
- Πολυμέσα
- CED0293.pdf
Τμήμα του Preparation of bill of quantities using the traditional method