Preparation of bill of quantities using the computer method
- Τίτλος
-
Preparation of bill of quantities using the computer method
- Θέμα
- Buildings--Estimates
- Δημιουργός
-
Papalefteri, Lefteris
- Πηγή
- Higher Technical Institute
- Το πλήρες κείμενο είναι διαθέσιμο από το Υπουργείο Ενέργειας, Εμπορίου Βιομηχανίας και Τουρισμού.
- Εκδότης
- Library of Cyprus University of Technology
- Ημερομηνία
- 2003
- Δικαιώματα
- Απαγορεύεται η δημοσίευση ή αναπαραγωγή, ηλεκτρονική ή άλλη χωρίς τη γραπτή συγκατάθεση του δημιουργού και κάτοχου των πνευματικών δικαιωμάτων.
- Μορφή
- Γλώσσα
- en
- Τύπος
- text
- Αναγνωριστικό
-
CED0379
- Σύνοψη
-
Bill of quantities is the means whereby the majority of building works is described and measured, it sets out the various item of work in recognized manner and in a logical sequence.
In addition to this bill of quantities assists building contractors to estimate the cost of a building project before any work commences.
There are three methods preparing the bill of quantities:
1. Traditional method
2. Cut and Shuffle method
3. By computer
In this project the COMPUTER method is used and the objective are as follows:
- to write a reported on the different method of "taking off" used in Cyprus.
- to compare them with SMM7
- to carry out the "taking off" measurements of the drawings provides using the traditional method.
This is a singlefloor house build in Avgorou. It is a standard house and its area is 180m2.
- Πολυμέσα
- CED0379.pdf
Τμήμα του Preparation of bill of quantities using the computer method