Design of the electrical services of a multistorey building
- Τίτλος
-
Design of the electrical services of a multistorey building
- Θέμα
- Electric power
- Tall buildings
- Δημιουργός
- Evis, Nicolaides
- Πηγή
- Higher Technical Institute
- Το πλήρες κείμενο είναι διαθέσιμο από το Υπουργείο Ενέργειας, Εμπορίου Βιομηχανίας και Τουρισμού.
- Εκδότης
- Library of Cyprus University of Technology
- Ημερομηνία
- 2004
- Δικαιώματα
- Απαγορεύεται η δημοσίευση ή αναπαραγωγή, ηλεκτρονική ή άλλη χωρίς τη γραπτή συγκατάθεση του δημιουργού και κάτοχου των πνευματικών δικαιωμάτων.
- Μορφή
- Γλώσσα
- en
- Τύπος
- text
- Αναγνωριστικό
-
EED0448
- Σύνοψη
-
The main objective of this project is to design the electrical installation, the storage heaters, and the lightning protection system.
This multistory building consists of three floors, the ground, first and second floor. Each floor consists of two flats (Flat No: 1 and Flat No: 2). Each Flat belongs to a different owner so it will be feed from a different meter. The stairs that is a communal load will be feed from a different meter.
The rust Chapter of this project examines the theory of protection and earthing. This chapter is very important because protection is one of the main goals that must be fulfilled in order to avoid accidents and losses of life.
Chapter 2 examines the theory of inspection and testing. This is also a very important chapter because before feeding with power our installation, it must be first inspected and tested from us and then from EAC.If our installation does not fulfill the requirements for safety during the
inspection of the EAC we must redesign the installation in order to have the permission to feed it with electricity.
Chapter 3 is based on the theory and calculations for illumination desigJf. The illumination calculations are carried out to find the require number of fitting to be used.
The electrical design calculations are carried out at Chapters 4 to 8. The electrical installation in circuits ie. Lighting circuits, power circuits (socket outlets and fixed appliances). In the electrical design calculations we find the appropriate overcurrent protective device (type and rating), live and CPC conductors cross sectional areas and we take into consideration voltage drop limitations and thermal constrains for the epc. Also these chapters contain diversity factors and maximum demand, main single line diagrams, storage heaters design and bonding.
At Chapter 9 we carried out the calculations for the lightning protection system, which is very essential in tall buildings with very high concentration of people.
Finally at Chapter 10 we carried out the costing of the Installation of the building.
- Πολυμέσα
- EED0448.pdf
Τμήμα του Design of the electrical services of a multistorey building