Development of an electronic cable simulator

Τίτλος

Development of an electronic cable simulator

Θέμα

Electric cables--Design and construction

Telephone cables

Electric lines

Δημιουργός

Panayiotou, Constantinos

Πηγή

Higher Technical Institute

Το πλήρες κείμενο είναι διαθέσιμο από το Υπουργείο Ενέργειας, Εμπορίου Βιομηχανίας και Τουρισμού.

Εκδότης

Library of Cyprus University of Technology

Ημερομηνία

1997

Συνεισφέρων

Theopeptou, Charalambos

Alexandrou, Alecos

Δικαιώματα

Απαγορεύεται η δημοσίευση ή αναπαραγωγή, ηλεκτρονική ή άλλη χωρίς τη γραπτή συγκατάθεση του δημιουργού και κάτοχου των πνευματικών δικαιωμάτων.

Μορφή

pdf

Γλώσσα

en

Τύπος

text

Αναγνωριστικό

EED0468

Σύνοψη

Nowadays cables become more and more efficient, reliable, faster on transferring information, less attenuated at higher frequencies and of course source for study and development.
But what is really behind a pair of cables? What is doing their behaviour specified in some conditions, enviromental, electrical, electromagnetic etc. etc? We will find out if we try to analyze such a cable i.e tranmission line.
So as the cable is a type of a transmission line we will try from the theory to examine it study it and combine it with practical solutions.
This project, "Development of an electronic cable simulator" is dedicated to cables of Cyprus Telecommunications Authority (CYT A). In other words, to cables with cross -sectional O.4mm, 0.5mm and O.63mm, Twisted Pair Sheilded cables (STP) and simulate their behaviour at 800Hz, 1600Hz, 16KHz, 40KHz, 64KHz and 150KHz.
As you can see after this, very good study of theory will result closer approximations on the practical solutions, many telecommunications engineering books, the CYTA's specification for telephone cables and wires, graphs, tables and real electronic simulator will help and guide that to happen.
We will study theory, we will use Mathematical program (MathCad 5.0+) to find our desirable results from the theory's formulas, we will use Electronic Workbench 4.0 program to simulate these results in semi-practical condition and fmally do a typical electronic cable simulator on a velo - board. Also a design of the PCB of the simulator was drawn on the Tango design program but due to delay was not finally used.